Software & Firmware
Control algorithms, gate driver firmware, and evaluation software to accelerate your development process and optimize system performance with CRRC Times Electric power semiconductors.
📚 Control Algorithm Libraries
Pre-validated control algorithms for common power electronics applications.
- Motor Control: FOC, DTC, and V/f control algorithms
- Grid-Tie Control: PLL, current control, and grid synchronization
- Power Management: MPPT, power balancing, and protection
- Digital Filters: Notch, low-pass, and adaptive filtering
🎛️ Gate Driver Firmware
Optimized firmware for intelligent gate drivers and isolated gate drive controllers.
- Protection Logic: Desaturation, undervoltage, thermal protection
- Timing Control: Deadtime generation and interlocking
- Diagnostics: Fault reporting and status monitoring
- Communication: SPI, I2C, and CAN interfaces
🖥️ Evaluation & Testing Software
GUI-based evaluation software for development boards and testing equipment.
- Parameter Tuning: Real-time control parameter adjustment
- Waveform Analysis: Built-in oscilloscope and FFT analysis
- Data Logging: Long-term performance monitoring
- Automated Testing: Scripted test sequences and reports
⚙️ Design & Simulation Tools
Software tools for component selection, thermal analysis, and system optimization.
- Module Selector: Interactive component selection tool
- Loss Calculator: Switching and conduction loss estimation
- Thermal Simulator: Junction temperature prediction
- PCB Layout Checker: Layout rule verification
Featured Software Resources
Motor Control Library v3.2
FOC & DTC Algorithms - Complete motor control library for TI C2000 DSPs
- Field-Oriented Control (FOC)
- Direct Torque Control (DTC)
- Sensorless operation support
- Multi-motor control capability
Grid-Tie Control Suite v2.1
Solar & Wind Inverters - Complete grid synchronization and control algorithms
- Phase-Locked Loop (PLL)
- Grid synchronization control
- Anti-islanding protection
- Power quality optimization
IGBT Gate Driver Firmware
Intelligent Gate Control - Advanced protection and diagnostic firmware
- Desaturation protection
- Active clamping control
- Thermal monitoring
- CAN bus communication
Supported Development Platforms
TI C2000 DSP
Optimized control algorithms for Texas Instruments C2000 real-time control processors
- TMS320F28xxx series
- Code Composer Studio
- ControlSUITE integration
STM32 MCU
ARM Cortex-M based motor control and power management solutions
- STM32F4/G4/H7 series
- STM32CubeMX integration
- X-CUBE-MCSDK support
Infineon AURIX
Automotive-grade control solutions for safety-critical applications
- TC3xx series MCUs
- AURIX Development Studio
- ISO 26262 compliance
Xilinx Zynq
FPGA-based high-performance control for advanced applications
- Zynq-7000 SoC
- Vivado Design Suite
- High-speed control loops
Evaluation Software Tools
LiTong Power Electronics Studio
Comprehensive Development Environment - All-in-one tool for power electronics development
Features:
- Real-time parameter tuning
- Oscilloscope integration
- Data logging and analysis
- Automated test sequences
Applications:
- Motor drive testing
- Inverter optimization
- Power supply validation
- System characterization
IGBT/SiC Characterization Tool
Device Testing Software - Automated characterization and curve tracing
Measurements:
- I-V characteristic curves
- Switching energy loss
- Gate charge analysis
- Thermal impedance
Output Formats:
- SPICE model parameters
- Datasheet generation
- Excel/CSV export
- PDF test reports
API & Integration Support
REST API
HTTP-based API for remote monitoring and control of power electronics systems
- Real-time data acquisition
- Parameter configuration
- Fault status monitoring
- JSON/XML data formats
MQTT Integration
IoT-ready messaging protocol for industrial automation and remote monitoring
- Publish/subscribe messaging
- Low bandwidth operation
- TLS encryption support
- Cloud platform integration
Modbus Support
Industrial communication protocol for SCADA and PLC integration
- Modbus RTU/TCP support
- Register mapping tables
- HMI integration examples
- Error handling and diagnostics
Custom Software Development Services
Need custom control algorithms or application-specific software? Our software engineering team can develop tailored solutions optimized for your specific requirements and constraints.
🎯 Custom Control Algorithms
Advanced control strategies tailored to your application
📱 HMI Development
User interfaces for monitoring and control systems
🔌 Protocol Implementation
Custom communication protocols and interfaces
☁️ Cloud Integration
IoT connectivity and cloud-based analytics